1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-No Switches (Includes Motor Plugs & Terminals)
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with No Switches or Wire Harness
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, motor plugs and terminals for your wiring.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
- Note: Our ACI motors are reverse polarity motors and require reverse polarity switches. Reverse polarity means that the ground is within the wiring harness rather than off the motor. The easiest way to determine if you have reverse polarity switches is to look at the number of poles on the back of a single switch. You must have 5 or more poles to have a reverse polarity switch.
Usually Ships in 1 to 2 Business Days
3 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Chrome Switches Door Placement
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with Standard Chrome Switches for Door Placement.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, completed wire harness, Standard chrome switches for door placement and conduit to protect the wires going thru the doors.
Standard Chrome Switch dimensions:
Bezel:
Quad: length = 4-7/16"; height = 1-13/16"
Single: length = 2" height = 1-3/4"
Hole Size:
Quad; length = 3-13/16; height = 1-1/4"
Single: length = 1-3/8"; height = 1-1/4"
Usually Ships in 1 to 2 Business Days
4 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Chrome Switches Console Placement
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with Standard Chrome Switches for Console Placement.
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, completed wire harness, standard chrome switches for console placement and conduit to protect the wires going thru the doors.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
- NOTE: Switch will be one 4 gang switch.
Standard Chrome Switch dimensions:
Bezel: Quad: length = 4-7/16"; height = 1-13/16"
Hole Size: Quad: length = 3-13/16"; height = 1-1/4"
Usually Ships in 1 to 2 Business Days
3 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Black Illuminated Switches Console Placement
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with Black Switches for Console Placement.
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, completed wire harness, black switches for console placement and conduit to protect the wires going thru the door.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
- NOTE: Black Switches will be 2 sets of doubles
Black Switch dimensions:
Bezel: Double length = 2"; height = 1-13/16"
Hole Size: Double: length = 1-13/16"; height = 1-5/8"
Usually Ships in 1 to 2 Business Days
3 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Nostalgic Switches Door Placement
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with Nostalgic Switches for Door Placement.
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, completed wire harness, nostalgic switches for door placement and conduit to protect the wires going thru the door.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
Nostalgic Switch dimensions:
Bezels:
Quad: length = 4-1/4"; height = 1-7/8"
Single: length = 1-11/16; height = 1-3/4"
Hole Size:
Quad: length = 4-1/16"; height = 1-1/4"
Single: length = 1-5/8"; height = 1-1/4"
Usually Ships in 1 to 2 Business Days
4 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Nostalgic Switches Console Placement
1965-1966 Impala Hard-Top Coupe/Convertible Front Door and Rear Quarter Power Window Kit with Nostalgic Switches for Console Placement.
Kit includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, completed wire harness, nostalgic switches for console placement and conduit to protect the wires going thru the doors.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
- Note: Switch will be one 4 gang switch.
Nostalgic Switch dimensions:
Bezel: Quad: length = 4-1/4"; height = 1-7/8"
Hole Size: Quad: length = 4-1/16"; height = 1-1/4"
Usually Ships in 1 to 2 Business Days
4 in stock!
1965-1966 Impala Front Doors & Rear Quarter Windows Hard-Top Coupe/Convertible-Nu-Cranks Switches (Use Your Original Handle)
1965-1966 Impala Hrd-Top Coupe/Convertible Front Door & Rear Quarter Window Power Window Kit with Nu-Crank Switches (Use Your Original Crank Handle).
Kit Includes: 4 regulators (left & right front, left & right rear), 4 new ACI motors, 4 wire harnesses, 4 Nu-Cranks Switches and conduit to protect the wires going thru the door.
- NOTE: The front door regulator mounts into the original power regulator holes. Picture included in the kit to assist with location.
- NOTE: All windows can be controlled with the installation of a master switch. Master switch and wire harness is sold separately - see accessories for details.
Nu-Cranks Shafts are different lengths in front and rear.
GM Large Round Spline - Longer Length:
Switch Housing: 2-1/4" x 3"
Shaft Length" 1-1/2" (to include housing 2-1/8")
Spline OD: 29/64" (.453)
Spline ID: 7/16" (.437)
GM Large Round Spline - Longer Length(213):
Switch Housing: 2-1/4" x 3"
Shaft Length" 1-1/2" (to include housing 2-1/8")
Spline OD: 29/64" (.453)
Spline ID: 7/16" (.437)
Usually Ships in 1 to 2 Business Days
4 in stock!