Home > Accessories > Switches
Choose a sub category:
Nu-Cranks Switches - Use your Handle Nostalgic Switches - GM Style For the Ford Guy's Switches
Chrome Switches GM Style Black Illuminated Switches Master Switch for Nu-Cranks

Power Window Switches

Nu-Relics offers power window switches to suit individual needs for any project.

For an original look, we offer Nu-Crank switches that will allow you to use the old crank handle as the power window switch. Seven different shaft options are available. In order to choose the right one, you will need to match your crank’s dimensions with the ones listed on the product’s page.

In addition to Nu-Crank switches, you may install a master switch to give the driver control of the windows. Two types of master switches are available: a switch to control one additional window and a switch to control all four windows.

We offer two types of GM-style switches as well as For the Ford Guy car window switches; the bezel on these switches resembles the look of the original GM and Ford switches respectively.

Sort By:
Page of 1
Master Switch for Nu-Cranks - Control One Additional Window

Installing a master switch allows an original look of the crank handles but the ability of the diver to control additional windows. Kit includes: a single switch, wiring harness, a single reinforcement, correct terminals and instructions.

  • Instructions Master Switch for Nu-Cranks to control one additional window
    Diagram
    Click Here Written Instructions Click Here
  • Usually Ships in 1 to 2 Business Days
    Our Price: $44.00
    13 in stock!
    standard chrome switch double console Standard Chrome Double Switch with Harness for Console Placement

    Standard Chrome Switch with completed wire harness for console placement. Reinforcement is included to hold the switch in the upholstery. The bezel is plastic which has been chromed. This is a reverse polarity switch

    Standard Chrome Switch dimensions:

    Bezel: Double: length = 2-7/8"; height = 1-3/4"
    Hole Size: Double: length = 2-1/4"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $150.00
    16 in stock!
    Black Illuminated Switches with Wire Harness for Console Placement

    Black Illuminated Switches with Wire Harness for Console Placement. The gray wire goes to the dash lights for illuminated. These are reverse polarity switches

    Black Double Switch dimensions:

    Bezel: length = 2"; height = 1-13/16"
    Hole Size: length = 1-13/16"; height = 1-5/8"

    Usually Ships in 1 to 2 Business Days
    Our Price: $150.00
    16 in stock!
    standard chrome switches double door Standard Chrome Switches Double for Door Placement

    Standard Chrome Switch with completed wire harness for door placement. Reinforcement is included to hold the switch in the upholstery. The bezel is plastic which has been chromed. These are reverse polarity switches.

    Standard Chrome switch dimensions:
    Bezel:
    Double: length = 2-7/8"; height = 1-3/4"
    Single: length = 2"; height = 1-3/4"
    Hole size:
    Double: length = 2-1/4"; height = 1-1/4"
    Single: length = 1-3/8"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $154.00
    14 in stock!
    Black Illuminated Switches with Wire Harness for Door Placement

    Black Illuminated Switches with Wire Harness for Door Placement.  The gray wire goes to the dash lights for illumination.  These are reverse polarity switches.

    Usually Ships in 1 to 2 Business Days
    Our Price: $154.00
    9 in stock!
    Master Switch for Nu-Cranks - Control all 4 Windows

    Installing a master switch allows an original look of the crank handles but the ability of the diver to control all 4 windows. Kit includes: a quad switch, wiring harness, a quad reinforcement, correct terminals and instructions.

  • Instructions - Master Switch for Nu-Cranks to control up to four windows
    Diagram Click Here Written Instructions Click Here
  • Usually Ships in 1 to 2 Business Days
    Our Price: $173.00
    12 in stock!
    GM Large Round/Short- Nu Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.


    Fits the following:
    Camaro- Front Doors and Rear Quarter Windows: 1967-1981
    Chevelle - Front Doors and Rear Quarter Windows: 1964-1972
    Chevy Truck: 1967-1971
    Corvette: 1956-1962
    El Camino: 1967-1972
    GM Cars - Front Doors and Rear Quarter Windows: 1949-1957
    Impala - Front Doors and Rear Quarter Windows: 1958
    Nova - Front Doors and Rear Quarter Windows: 1963-1967
    Studebaker: 1949-1964

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" x 3"
    Shaft Length" 7/8" (to include housing 1-1/2")
    Spline OD: 29/64" (.453)
    Spline ID: 7/16" (.437)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    14 in stock!
    Ford Small Round for Screw on Handle - Spline Mid Shaft - Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.


    Fits the following vehicles:
    Mustang Front Doors 1964-1967
    Ford Trucks 1967-1979
    Bronco 1978-1979
    Ford Fairlane Front Doors and Rear Quarter Windows 1966-1967

    NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" x 3"
    Shaft Length" 1-1/4" (to include housing 1-7/8")
    Spline OD: 27/64" (.421)
    Spline ID: 3/8" (.375)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    16 in stock!
    Ford Round Spline Mustang Rear 64-73 Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.


    Switch Housing: 2-1/4" x 3"
    Shaft Length" 1-1/2" (to include housing 2-1/8")
    Spline OD: 27/64" (.421)
    Spline ID: 3/8" (.375)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    Ford Square Shaft - Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.


    Fits the Following:
    Ford Cars - 1928-1948, 1949-1951
    Ford Trucks - 1928-1952
    Ford Woody - 1949-1951
    Dodge Cars - 1933-1948
    Studebaker Cars - 1947-1948
    Willy's - 1940-1941

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" X 3"
    Shaft Length: 1" (to include housing 1-5/8"
    Shaft width: 3/8" (.375)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    14 in stock!
    GM Large Round/Long - Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    Fits the following:
    Chevy Truck: 1972, 1973-1987
    Corvette: 1968-1982
    El Camino: 1959-1960
    Impala Front Doors: 1959-1968, 1971-1976
    Impala 4 DR - Front Doors and Rear Doors - 1959-1960
    Nova Front Doors and Rear Quarter Windows : 1968-1979
    Suburban Front Doors and Rear Windows: 1972

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" x 3"
    Shaft Length" 1-1/2" (to include housing 2-1/8")
    Spline OD: 29/64" (.453)
    Spline ID: 7/16" (.437)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    GM Small Round-Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    Fits the following:
    GM Front Doors - 1930-1948
    GM Front Doors and Rear Quarter Windows 1947-1948

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" X 3"
    Shaft Length: 1-5/16 (to include housing 1-15/16")
    Spline OD: 27/64" (.421)
    Spline ID: 3/8 (.375)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    Gm Truck 1936-1946 - Nu-Cranks

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" x 3"
    Shaft Length" 7/8" (to include housing 1-1/2")
    Shaft width: 5/16" (.312)

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    Gm Truck 1947-1966 - Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" x 3"
    Shaft Length" 1-3/8" (to include housing 2")
    Spline OD: .424
    Spline ID: .385

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    15 in stock!
    Ford Round for Screw on Handle - Spline top of Shaft Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    Fits the following:
    Ford Fairlane - Front Doors and Rear Quarter windows: 1968-1969
    Ford Galaxie - - Front Doors and Rear Quarter Windows: 1965-1968
    Mustang - Front Doors: 1968-1973

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" X 3"
    Shaft Length: 1-1/8" (to include housing 1-3/4")
    Shaft OD: 4.34
    Shaft ID: .389

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    Ford Round for Clip on Handles - Nu-Crank Switches & Wiring

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    Fits the following:
    Bronco: 1966-1967
    Ford Cars - Front Doors and Rear Quarter Windows: 1952-1964
    Ford Falcon 2 DR Sedan: 1960-1965
    Ford Ranchero: 1957-1959
    Ford Starliner - Front Doors and Rear Quarter Windows: 1960-1961
    Ford Truck: 1953-1966

    • NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" X 3"
    Shaft Length: 1-1/4" (to include housing 1-7/8")
    Shaft OD: .431
    Shaft ID: .383

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    14 in stock!
    Bronco 68-77 - Nu-Crank Switches & Wiring

    Fits: 1968-1977 Bronco

    Keep an original look by using Nu-Crank Switches. Nu-Crank switches allow you to use your crank handle as the switch. The housing is aluminum which has been milled with solid tabs inside so the micro switches are protected. Included are 2 switches and 2 completed wire harnesses.

    NOTE: Customer can control all windows with the installation of a master switch. Master switches are sold separately and are also available in the accessories section.

    Switch Housing: 2-1/4" X 3"
    Shaft Length: 7/8" (to include housing 1-3/8"
    Shaft OD: .434
    Shaft ID: .389

    Usually Ships in 1 to 2 Business Days
    Our Price: $220.00
    10 in stock!
    Nostalgic Switches GM Style Double with Harness for Console Placement

    Nostalgic Switches with completed wire harness for console placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. This is a reverse polarity switche. These are not direct replacements for the original switches.

    Nostalgic Switch dimensions:

    Bezel: Double: length = 2-1/2"; height = 1-7/8"
    Hole: Double: Length = 2-3/8"; Height = 1-3/8"

    Usually Ships in 1 to 2 Days
    Our Price: $234.00
    10 in stock!
    For the Ford Guy's Switches Double with Harness for Console Placement

    For the Ford Guys Switches with completed wire harness for console placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed The single bezel is a circle and the master switch is an elongated circle. The bezels resemble earlier Ford switches. This is a are reverse polarity switch. These are not direct replacements for the original switches.

    For the Ford Guy's Switch dimensions:

    Bezel: Double: length = 3"; height = 2-1/4"
    Hole Size: Double: length = 2-3/8"; height = 1-7/16"

    Usually Ships in 1 to 2 Days
    Our Price: $234.00
    10 in stock!
    Nostalgic Switches GM Style Double with Harness for Door Placement

    Nostalgic Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These are reverse polarity switches. These are not direct replacements for the original switches.

    Nostalgic Switch dimensions:

    Bezel:
    Double: length = 2-1/2"; height = 1-7/8"
    Single; length = 1-11/16"; height = 1-3/4"
    Hole:
    Double: Length = 2-3/8"; Height = 1-3/8"
    Single: length = 1-5/8"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    List Price: $236.00
    Our Price: $236.00
    9 in stock!
    For the Ford Guy's Switches Double with Harness for Door Placement

    For the Ford Guy's Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The single bezel is a circle and the master switch is an elongated circle. The bezels resemble earlier Ford switches. These are reverse polarity switches. These are not direct replacements for the original switches.

    For the Ford Guy's Switch dimensions:

    Bezel:
    Double: length = 3"; height = 2-1/4"
    Single = 2-1/4" diameter
    Hole Size:
    Double: length = 2-3/8"; height = 1-7/16";
    Single: length = 1-3/4"; height = 1-1/2"

    Usually Ships in 1 to 2 Days
    Our Price: $236.00
    16 in stock!
    Standard Chrome Quad Switch with Harness for Console Placement

    Standard Chrome 4 gang switch with wire harness to be placed on a console. Reinforcement is included to hold switch in the upholstery. The bezel is plastic which has been chromed. This is a reverse polarity Switch

    Standard Chrome Switch dimensions:

    Bezel: Quad: length = 4-7/16"; height = 1-13/16"
    Hole Size: Quad: length = 3-13/16"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $260.00
    16 in stock!
    standard chrome switches 4 window door Standard Chrome Switches 4 Window Kit for Door Placement

    Standard Chrome Switch with completed wire harness for door placement. Reinforcement is included to hold the switch in the upholstery. The bezel is plastic which has been chromed. These are reverse polarity switches.

    Standard Chrome Switch dimensions:
    Bezel:
    Quad: length = 4-7/16"; height = 1-13/16"
    Single: length = 2" height = 1-3/4"
    Hole Size:
    Quad; length = 3-13/16; height = 1-1/4"
    Single: length = 1-3/8"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $275.00
    15 in stock!
    Black Illuminated Switches with with harness for Console Placement - 4 Window Kit

    Black Illuminated Switches with Wire Harness for Console Placement in a 4 Window Kit is 2 sets of double switches.   The gray wire goes to the dash lights for illuminated.   These are reverse polarity switches.

    Usually Ships in 1 to 2 Business Days
    Our Price: $300.00
    9 in stock!
    Nostalgic Switches GM Style Quad with Harness for Console Placement

    Nostalgic Switches with completed wire harness for console placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These is a reverse polarity switch. These are not direct replacements for the original switches.

    Nostalgic Switch dimensions:

    Bezel: Quad: length = 4-1/4"; height = 1-7/8"
    Hole Size: Quad: length = 4-1/16"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $440.00
    9 in stock!
    For the Ford Guy's Switches Quad with Harness for Console Placement

    For the Ford Guys Switches with completed wire harness for console placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The single bezel is a circle and the master switch is an elongated circle. The bezels resemble earlier Ford switches. These are reverse polarity switches. These are not direct replacements for the original switches.

    For the Ford Guy's Switch dimensions:

    Bezel: Quad: length = 5"; height = 1-7/8"
    Hole Size: Quad: length=4-1/8"; height = 1-3/8"

    Usually Ships in 1 to 2 Days
    Our Price: $440.00
    10 in stock!
    Nostalgic Switches GM Style Quad with Harness for Door Placement

    Nostalgic Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These are reverse polarity switches. These are not direct replacements for the original switches.

    Bezels:

    Quad: length = 4-1/4"; height = 1-7/8"
    Single: length = 1-11/16; height = 1-3/4"
    Hole Size:
    Quad: length = 4-1/16"; height = 1-1/4"
    Single: length = 1-5/8"; height = 1-1/4"

    Usually Ships in 1 to 2 Days
    Our Price: $445.00
    10 in stock!
    For the Ford Guy's Switches Quad with Harness for Door Placement

    For the Ford Guys Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The single bezel is a circle and the master switch is an elongated circle. The bezels resemble earlier Ford switches. These are reverse polarity switches. These are not direct replacements for the original switches.

    For the Ford Guy's Switch dimensions:

    Bezel:
    Quad: length = 5"; height = 1-7/8"
    Single: 2-1/4 diameter
    Hole Size:
    Quad: length = 4-1/8"; height = 1-3/8";
    Single: length = 1-3/4" height = 1-1/2"

    Usually Ships in 1 to 2 Days
    Our Price: $445.00
    10 in stock!